Silicon Steel Slitting Machine (new)
Product Code : KN016
Brand Name : Ke Nuo
Product Description
The slitting machine (New model)
Construction and characteristics of the production line
Decoiler including the feeding vehicle (hydraulic pressing, electric moving of the material vehicle, Electric lift)
- material supporting device
- adjustable guide device
- roll slitting machine
- supporting intermediate bridge
- pressing guide device
- Recoilder(hydraulic pressing)
- Hydraulic station
- Control cabinet and operation desk
- Carbide cutting tools :12 pcs
1.requirement of the decoiler
Inside diameter:f500mm
- width:500-1250mm
- max weight:6T
- max outside diameter:φ1200mm
- thickness of the silicon steel sheet:0.21-0.5mm
2.Coils specification
(1)max inside diameter of recoils:f510mm
(2)min width of cutting sheet:40mm
3.Technical specification and main parameter
(1) spindle diameter:Φ125mm,
- HRC53-59,Rockwell hardness of the spindle surface
- axial termination runout≤0.003mm,
- radial runout≤0.02mm,
- end runout after installing the roll scissors≤0.012mm;
(3)Recoiler end nonstraightness below 1.0mm (continuous uniform cutting speed, 10 circles inner layer not considered
(4)Maximum number of knives
(5)Recoil pressure:500kg(adjustable air bag)
(6)Cutting burr≤0.02mm;
(7) Single edge non-straightness≤0.2mm/2000mm;
(8)tolerance of cutting width:±0.1mm;
(9)Diameter of knife tool:Φ250mm,
4. Working voltage: voltage fluctuation 380V±10%,Frequency 50HZ±2%
5. Environmental conditions: not more than 45°C for the temperature and not higher than 85% for the humidity.
6. Equipment operation direction: Left
X
Cangzhou Industrial Zone, Cangzhou - 061000, Hebei, China
Mr Owen Ge
(Director)
![]() |
CANGZHOU KENUO INTERNATIONAL CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |