Back to top
Send Inquiry

Header Pipe Notching Machine For Transformer Radiator Production

Header Pipe Notching Machine For Transformer Radiator Production
Send Inquiry
Product Code : 8504901900
Product Description

Header pipe punching machine

  • The Header Punch Machine/Press is designed to automatically index to create up to 40 pairs of slots on a pipe (for a maximum 40 panels). The header pipe is cut simultaneously with 2 specially shaped, rectangular type slots for each panel. During the punching operation, the pipe is supported internally to prevent deformation. These slots are matched to the manufacturer standard design panel profile for optimal flow. The header pipe is then automatically indexed for the next panel and is punched again. The indexing distance is variable via computer indexing control, which enables the panel spacing to be easily changed if required. Cycle time to punch and move to next punch position is approximately 6 seconds. 
  • The Header Punch Press tool is hydraulically operated. The hydraulic power unit is integrated into the frame of the machine minimizing the footprint of the machine. The hydraulic power system can be equipped with air / oil or water / oil cooling systems in applications where ambient temperatures are higher.

Specification

Unit

Requirement

Offered

Header pipe diameter (outer)

mm

90


Header pipe wall thickness

mm

3.0


Number of slots in header pipe for each panel


02 (1 Pair)


Center distance b/w slots for panels

mm

42 to 50 
(Variable)


Maximum length of header pipe

mm

Up to 2000


Operating Conditions
The temperature
Humidity


°C 
%


8 to 42 
100

 

Pneumatic connection

bar

6




CANGZHOU KENUO INTERNATIONAL CO., LTD.
X


Cangzhou Industrial Zone, Cangzhou - 061000, Hebei, China
Mr. Owen Ge (Director)

Product Showcase
Send Inquiry