Partial Discharge Test Equipment For Power Transformer Testing

Send Inquiry

Request To Call Back

Partial Discharge Test Equipment For Power Transformer Testing

Name: Partial Discharge Test Equipment For Power Transformer Testing
Brand: CANGZHOU KENUO INTERNATIONAL CO., LTD.
Price: 10000 USD
Availability: InStock

Price 10000 USD ($)/ Set

Get a Price/Quote

MOQ : 1 Unit

Partial Discharge Test Equipment For Power Transformer Testing Specification

Load Loss
Low, <2%

Cooling Type
Oil Cooled or Air Cooled

Dimension (L*W*H)
700 mm x 400 mm x 600 mm (Approx.)

Rated Voltage
Up to 100 kV

High Voltage
Up to 150 kV

Capacity
5 kVA 1000 kVA

Voltage Booster Type
Automatic

Low Voltage
220 V to 1100 V

Coil Material
Copper

Operating Temperature
-10C to +50C

Standard
IEC 60270, IS 8437

Product Type
Partial Discharge Test Equipment

Material
High Grade Electrical Insulation Material and Metallic Enclosure

Output
Digital Display, Analog Output Option

Frequency (MHz)
Standard range: 0.1 MHz 10 MHz

Efficiency
High, >98%

Phase
Three Phase

Usage
Partial Discharge Testing of Power Transformers

Coil Structure
Layer or Winded

Coil Number
Multiple Coils

Power Scope
Up to 2500 kVA

Weight
Approx. 45 kg 75 kg

Test Method
On-site or Laboratory PD Measurement

Mobility
Portable, Wheeled Trolley Design

Safety Features
Emergency Shutoff, Overload Protection

Detection Sensitivity
<2 pC

Calibration
Automatic and Manual Modes

Data Storage
Internal Memory with USB Export

Accessories
BNC Cables, HV Coupling Capacitor, Test Leads

Input Power Supply
230 V AC, 50/60 Hz

Signal Processing
Advanced Noise Filtering and Digital Signal Processing

Display Type
TFT Touchscreen, LCD Digital Readout

Connector Type
Standard BNC and HV Connectors

Partial Discharge Test Equipment For Power Transformer Testing Trade Information

Minimum Order Quantity
1 Unit

Supply Ability
10 Units Per Month

Delivery Time
60 Days

About Partial Discharge Test Equipment For Power Transformer Testing

Partial Discharge Testing System

Description : This system is used for measuring partial discharge of transformer, motor, instrument transformer, cable, GIS, switch and arrester, etc. The system has multi channel measuring function which allows measuring several test or several points. This method can be successfully used for big transformers and transformer substation.

Main components

No partial discharge transformer
Partial discharge measuring instrument
Isolation low pass filter
Coupling capacitor
Current limiting resistance
Control panel

Frequency 50, 100, 150, 200, 400Hz
3dB fL 10x20x40KHZ optional
3dB fH 80x200x300KHZ optional
Rough adjustment 6 range 20 1dB fine tuning range >20dB

Advanced Signal Processing for Accurate Results

Equipped with state-of-the-art digital signal processing and advanced noise filtering, this test equipment ensures accurate readings even in environments with high electrical noise. This degree of sensitivity, detecting discharges as low as 2 pC, enables early identification of potential insulation faults, thereby minimizing transformer failure risk.

Designed for Operator Safety and Convenience

User safety is prioritized with features like emergency shutoff and overload protection. The units portability, thanks to its wheeled trolley design and robust metallic enclosure, facilitates on-site transportation and installation, while clear digital and analog outputs make data easy to interpret.

User-Friendly Operation and Comprehensive Data Management

The intuitive TFT touchscreen interface and LCD readout support straightforward operation. Internal memory, coupled with USB export, ensures that measurement data can be conveniently stored and analyzed, supporting both rapid on-site troubleshooting and detailed laboratory analysis.

FAQs of Partial Discharge Test Equipment For Power Transformer Testing:

Q: How is partial discharge detected using this equipment?

A: Partial discharge is detected by connecting the instrument to a power transformer via high-voltage (HV) coupling capacitors and BNC cables. The advanced digital signal processing algorithms filter out noise, allowing the device to accurately measure even very small discharges, down to less than 2 pC, as per IEC 60270 methodology.

Q: What are the main benefits of using this PD test equipment for transformer testing?

A: The equipment offers high sensitivity for early fault detection, comprehensive safety overlays (emergency shutoff, overload protection), reliable data integrity with internal memory and USB export, and portability through its wheeled trolley design. These features help reduce transformer failure risk, supporting cost-effective maintenance and greater operational assurance.

Q: When and where should partial discharge testing be performed?

A: Partial discharge testing should be conducted during routine maintenance, pre-commissioning, and whenever abnormal transformer behavior is observed. The portable nature of the equipment allows use both on-site at substations and in controlled laboratory environments, adapting to varying operational needs.

Q: What types of transformers can this equipment test, and what are its capacity limits?

A: This PD test equipment is suitable for layer or winded coil power transformers with three-phase configurations. It supports units up to 2500 kVA, rated voltages of up to 100 kV (primary side), and high voltages up to 150 kV. The frequency operating range is 0.1 MHz to 10 MHz.

Q: How do users manage and export test data from the equipment?

A: Measurement data is automatically saved in the devices internal memory. Users can easily export records via the integrated USB port, facilitating data review, sharing, or more detailed analysis on external computing platforms.

Q: What safety features are integrated into this equipment?

A: Safety features include an emergency shutoff function and automatic overload protection, minimizing risk to operators and connected equipment. The enclosure uses high-grade electrical insulation and metal to further ensure user and asset security during operation.

Q: What accessories come supplied with the PD test kit, and how do they enhance usability?

A: The kit includes BNC cables, high-voltage coupling capacitors, and test leads. These accessories enable flexible testing setups and ensure secure, reliable connections between the device and transformers, enhancing both safety and efficiency in operation.

Tell us about your requirement