Back to top
   Call Me Free Offline Send Inquiry

Transformer Vacuum Equipment

Transformer Vacuum Equipment is designed to provide efficient purification of oil in the transformer and drying of transformers and their equipments. This is ideal to enhance the efficacy rate of the transformers with unmatched features of purifying, dehydrating and degassing of insulation oils. It is designed to be used for transformers from low to high voltages, circuit breakers, etc. It is ideal to upgrade the electrical insulating fluids from transformer oils, silicone fluids to many more. With high vacuum process and efficacy, it completely removes free water, dissolved gases as well as other particulate matter. It is available in mobile as well as stationary form in different sizes from 50 to 6,000 GPH.

The equipment is designed to ensure swift starting with high-pumping rate to provide the best performance. In addition, it is also available with vacuum gauge to measure as well as control the vacuum level of pumped container.
 
Features of Transformer Vacuum Equipment:
  • Available with exclusive degassing and dewatering design to make the insulation oil fully uncovered
  • Ensures to attain optimal dehydration with degasification effect
  • Designed with special filter cartridge to filter the particles 100 times more that any conventional filter
  • Minimum surface heating to not to decompose the insulation oil
Product Image (8477101090)

variable pressure vacuum drying furnace for transformers active parts

This kind of variable-pressure vacuum drying furnace adopts variable-pressure drying principle suggested by Dr. Moll from Germany, specialized for drying transformer bodies. Comparing to conventional vacuum hot air cycling method, drying cycle of this variable-pressure type has been saved about 30-45%.

Product Image (8477101090)

full automatic vacuum casting machine for epoxry resin dry-type transformers

Full automatic VRC-10E vacuum casting machine for transformers is special for epoxy resin casting dry type transformers, bushings, current transformers, potential transformers, HV switch insulators, arc-distinguish coils and other electric apparatus.

Product Image (8477101090)

Transformer vacuum drying furnace

This kind of variable-pressure vacuum drying furnace adopts variable-pressure drying principle suggested by Dr. Moll from Germany, specialized for drying transformer bodies. Comparing to conventional vacuum hot air cycling method, drying cycle of this variable-pressure type has been saved about 30-45%.

Product Image (8477101090)

Vacuum transformer oil purifier

This is a typical double-stage vacuum oil purifier, special for dehydrating, degassing and purifying different kind of insulation oils used in high voltage transformers and circuit breakers, etc. It is suitable for installation site and overhauling site working because of combining vacuum degassing and vacuum filling functions together.

Product Image (8477101090)

Transformer Oil Filtration Machine

The machine is mainly used for electric power department and industries to deal with various oils such as transformer oil

Product Image (8477101090)

Kerosene Vapor Phase Drying Equipment (VPD) For Big Power Transformer

Kerosene vapor phase drying equipment (KVPD) is mainly used for drying bodies for 110KV and more super high voltage transformer and reactors, etc.

Product Image (8477101090)

Vacuum Drying And Oil Filling Chamber For Power Transformer Manufacturing

This equipment is used to drying and fill the transformer oil in vacuum condition

Product Image (8477101090)

VPI System Dia 1600*3000mm For Resin Vacuum Pressure Impregnation

VPI System Technical Specification Ø General Introduction The VPI system is used for impregnat ing of elements of electrical motors, and also can be used for impregnating of reactor, power transformer, etc. The insulation class can be up to H class. This VPI system is designed and made as per...

Product Image (8477101090)

Vacuum Drying And Oil Filling Machine Plant For Transformer Production

This equipment is used to fill the transformer oil in vacuum condition

Product Image (8477101090)

Vacuum Pressure Impregnation Equipment VPI System For Motor Transformer Capacitor Production

This kind of equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator

Product Image (8477101090)

HS-35A Vacuum Drying Oven Euipment With Vacuum Variable Pressure Changing Procedure

This vacuum drying oven is designed for drying the active parts of transformers under vacuum. The equipment is designed and manufactured with abundant experience and advanced technology, it can save about 40-50% time of drying compared with kindred products. It adopts automatically PLC control, supply drying processes (10KV & 33KV) for drying transformers 33KV 50MVA level products and other electric products.

Product Image (8477101090)

Vacuum Epoxy Resin Casting Machine Chamber For Dry Type Transformer Reactor Making

The vacuum casting equipment is specially used in the production of dry type transformer, bushings, dry type reactor

Product Image (8477101090)

Industrial Vacuum Drying Oven Heating By Gas Burner For Transformer Drying

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

Vacuum Drying Oven Or Chamber For Power Transformer

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

Vacuum Drying Oven Furnace Or Chamber For Transformer Reactor Etc Production

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

VPI System Vacuum Pressure Impregnation Equipment For Transformer Or Motor Production

This kind of VPI equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator, H class dry type transformer, power capacitor, cable insulation, and motor repairing, etc. For example, coil winding of motor or transformer...

Product Image (8477101090)

Equipment For Vacuum Pressure Impregnation - VPI Equipment

This kind of VPI equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator, H class dry type transformer, power capacitor, cable insulation, and motor repairing, etc. For example, coil winding of motor or transformer...

Product Image (8477101090)

Dry-Type Transformer Vacuum Epoxy Resin Casting Plant

Dry-type transformer vacuum epoxy resin casting plant Product description The vacuum casting equipment is specially used in the production of dry type transformer, bushings, dry type reactor, high voltage switch insulation, and related electrical products. It mainly consists of material tank,...

Product Image (8477101090)

Power Transformer Vacuum Drying Furance Manufacturing

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products. The equipment adops variable pressure drying principle suggested by Dr.Moll from Germany; it can save about 30-45% time of drying compared with conventional vacuum drying system. Rectangle and round tank can be option according to the production need.

Product Image (8477101090)

Epoxy Resin Casting Molds For Dry Type Transformer Use

Dry Type Transformer Epoxy Resin Casting Molds

Product Image (8477101090)

2.5*1.6*1.6m Vacuum Annealing Furnace

This vacuum annealing furnace is mainly used for vacuum annealing for the cores of transformers and reactors and other electrical products, to improve core permeability, thereby reducing transformer losses.

Product Image (8477101090)

HS-300A Automatic Vacuum Casting Machine(Dynamic Material Mixing)

Our vacuum casting machine adopt industrial computer controlling & manual controlling modes. Automatic record material tank, casting tank, mould temperature, vacuum degree. Preset material tank feeding rate.

Product Image (8477101090)

VPI Equipment For Transformer Reactor Motor Repairing

VPI System Technical Specification Ø General Introduction The VPI system is used for impregnat ing of elements of electrical motors, and also can be used for impregnating of reactor, power transformer, etc. The insulation class can be up to H class. This VPI system is designed and made as per...

Product Image (8477101090)

Transformer Oil Filtration Machine

The machine is mainly used for electric power department and industries to deal with various oils such as transformer oil

Product Image (8477101090)

Movable Vacuum System

This system is applicable for evacuating large transformers or for maintaining large transformers on site.

Product Image (8477101090)

Vacuum Annealing Furnace

This equipment is mainly used for vacuum annealing for the cores of transformers and reactors and other electrical products, to improve core permeability, thereby reducing transformer losses.

Product Image (8477101090)

Kerosene Vapor Phase Drying Equipment (VPD) For Big Power Transformer

Kerosene vapor phase drying equipment (KVPD) is mainly used for drying bodies for 110KV and more super high voltage transformer and reactors, etc.

Product Image (8477101090)

Vacuum Drying And Oil Filling Chamber For Power Transformer Manufacturing

This equipment is used to drying and fill the transformer oil in vacuum condition

Product Image (8477101090)

VPI System Dia 1600*3000mm For Resin Vacuum Pressure Impregnation

VPI System Technical Specification Ø General Introduction The VPI system is used for impregnat ing of elements of electrical motors, and also can be used for impregnating of reactor, power transformer, etc. The insulation class can be up to H class. This VPI system is designed and made as per...

Product Image (8477101090)

Vacuum Pressure Impregnation Equipment VPI System For Motor Transformer Capacitor Production

This kind of equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator

Product Image (8477101090)

HS-35A Vacuum Drying Oven Euipment With Vacuum Variable Pressure Changing Procedure

Haoshuo Technology is known as one of the leading China manufacturers and suppliers of hs-35a vacuum drying oven. Equipped with a productive factory, we warmly welcome you to purchase hs-35a vacuum drying oven with high precision and reliable performance with us. Expecting to be your long-term...

Product Image (8477101090)

Vacuum Epoxy Resin Casting Machine Chamber For Dry Type Transformer Reactor Making

The vacuum casting equipment is specially used in the production of dry type transformer, bushings, dry type reactor

Product Image (8477101090)

Industrial Vacuum Drying Oven Heating By Gas Burner For Transformer Drying

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

Epoxy Resin Casting Molds For Dry Type Transformer Use

Dry Type Transformer Epoxy Resin Casting Molds

Product Image (8477101090)

Power Transformer Vacuum Drying Furance Manufacturing

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products. The equipment adops variable pressure drying principle suggested by Dr.Moll from Germany; it can save about 30-45% time of drying compared with conventional vacuum drying system. Rectangle and round tank can be option according to the production need.

Product Image (8477101090)

HS-300A Automatic Vacuum Casting Machine (Dynamic Material Mixing)

Our vacuum casting machine adopt industrial computer controlling & manual controlling modes. Automatic record material tank, casting tank, mould temperature, vacuum degree. Preset material tank feeding rate.

Product Image (8477101090)

2.5*1.6*1.6m Vacuum Annealing Furnace

This vacuum annealing furnace is mainly used for vacuum annealing for the cores of transformers and reactors and other electrical products, to improve core permeability, thereby reducing transformer losses.

Product Image (8477101090)

Vacuum Drying Oven Or Chamber For Power Transformer

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

Vacuum Drying Oven Furnace Or Chamber For Transformer Reactor Etc Production

The vacuum drying furnace is designed for drying the parts and elements of transformers, reactor and related electrical products.

Product Image (8477101090)

VPI System Vacuum Pressure Impregnation Equipment For Transformer Or Motor Production

This kind of VPI equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator, H class dry type transformer, power capacitor, cable insulation, and motor repairing, etc. For example, coil winding of motor or transformer...

Product Image (8477101090)

Equipment For Vacuum Pressure Impregnation - VPI Equipment

This kind of VPI equipment is mainly application of insulation processing for electrical products, such as high voltage motor, generator, H class dry type transformer, power capacitor, cable insulation, and motor repairing, etc. For example, coil winding of motor or transformer...

Product Image (8477101090)

Dry-Type Transformer Vacuum Epoxy Resin Casting Plant

Dry-type transformer vacuum epoxy resin casting plant Product description The vacuum casting equipment is specially used in the production of dry type transformer, bushings, dry type reactor, high voltage switch insulation, and related electrical products. It mainly consists of material tank,...

Product Image (8477101090)

Epoxy Resin Vacuum Casting Forming Equipment For Dry Type Transformer And CT PT Production

Epoxy resin vacuum casting forming equipment Product description The vacuum casting equipment is specially used in the production of dry type transformer, bushings, dry type reactor, high voltage switch insulation, and related electrical products. It mainly consists of material tank, mixing...

X


Cangzhou Industrial Zone, Cangzhou - 061000, Hebei, China
Mr. Owen Ge (Director)

Product Showcase
   Call Me Free Offline Send Inquiry